Fix Your Stuff Community Store

Element GC-1020 Back Cover Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prerequisite only guide for Element GC-1020 back cover replacement.

What you need

  1. Element GC-1020 Back Cover Replacement, Back Cover Replacement Guide: step 1, image 1 of 1

    • Unscrew the four screws (size: 3.175mm) on the left and right side of the Element Electronics GC-1020 device using the PH#0 screwdriver.

    Edit

  3. Element GC-1020 Back Cover Replacement: step 2, image 1 of 1

    • Carefully pull the back of the device (the silver portion) apart from the rest of the device.

    • If you pull back too forcefully the power button would move out of place.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Lashaun Noel

Member since: 09/25/15

591 Reputation

5 Guides authored

Badges: 6

+3 more badges

Team

University of Tampa, Team 1-4, Whiteside Fall 2015 Member of University of Tampa, Team 1-4, Whiteside Fall 2015

UT-WHITESIDE-F15S1G4

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 33