Introduction
Follow this guide to remove the electrical panel on a 2014 Kushlan Cement Mixer model 600DDS.
This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.
What you need
-
-
-
Use a 13 mm socket to remove the two bolts securing the motor cover to the frame.
Ask FixBot
-
-
-
-
-
-
Use a Phillips screwdriver to remove the four screws securing the electrical panel.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
