Electric Jet Fan Blower blade fan Replacement

Step 1 Tools Needed

• Tools needed to fix your Ryobi Electronic Jet Fan Blower: ½” wrench or socket and a #16 5 point star screwdriver
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2 Disassembly




• Locate the 7 screws along the handle and remove them with the #16 5 point star screwdriver
• Locate the 2 additional screws on the under-body and remove them
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Gently wedge apart the handle being careful not to damage the wiring inside.
• Carefully separate the two parts of the handle
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Remove the grey switch plate. Note how the wiring is laid out on your particular model as it may vary.
• Remove the 2 screws and spacer holding the plug in.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Gently wedge the chute away from the main carriage. It may be on tight but should come apart with light pressure.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Remove nut with a ½” wrench (or socket) clockwise while holding the fan blade still.
• The fan blade should easily slide off once the nut is removed. If you are looking to replace your fan blade, you are now able to slide one on.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 7
• The fully disassembled Ryobi Electric Jet Fan Blower
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Author

with 3 other contributors

Tiara Stigall

Member since: 12/13/17

145 Reputation

1 Guide authored

Badges: 4

• 
• 
• 

+1 more badge

Team

Triple S, Inc Member of Triple S, Inc

Community

3 Members

1 Guide authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview