Fix Your Stuff Community Store

Eleaf iJust 3 Disassembly

Introduction

iJust 3 is third edition in the series of iJust’s. It’s well known among users all around the world. During using it you can encounter most common problem - putrescent fire button.

What you need

  1. Eleaf iJust 3 Disassembly, Eleaf iJust 3 Teardown: step 1, image 1 of 1

    • Specification of iJust 3:

    • Resistance range: 0.1 Ohm - 3.0 Ohm

    • Battery voltage: 3.7V

    • Max power: 80W

    Edit

  2. Eleaf iJust 3 Disassembly: step 2, image 1 of 2 Eleaf iJust 3 Disassembly: step 2, image 2 of 2

    • Insert stick into vice (attach it to the top part) and slowly pull up by "tube part"

    • Be carefull! If you will pull it too fast and too strong, you can break away battery

    Edit

  4. Eleaf iJust 3 Disassembly: step 3, image 1 of 1

    • Unscrew two screws on the sides of board.

    Edit

  5. Eleaf iJust 3 Disassembly: step 4, image 1 of 1

    • Thats all, thanks for your attention

    Edit
Finish Line

5 other people completed this guide.

Author

with 1 other contributor

Szymon Milewski

Member since: 12/28/20

741 Reputation

3 Guides authored

Badges: 19

+16 more badges

2 Comments

It was very helpful, thank you!

kali1902 - Reply

I don’t think Ifixit should be hosting repair guides for products that can damage your health.

guardian10 - Reply

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 21

Past 30 Days: 57

All Time: 4,937