Fix Your Stuff Community Store

Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement

Introduction

Use this guide to remove the control handle assembly on an Echo Power Pruner 254 cc PPT2620 2019.

What you need

  1. Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement, Disconnect the spark plug: step 1, image 1 of 2 Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement, Disconnect the spark plug: step 1, image 2 of 2

    • Move the stop switch into the "stop" position to turn the pruner off before attempting any repairs.

    • Pull the spark plug cap straight off of the spark plug.

    Edit

  3. Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement, Remove the control handle assembly: step 2, image 1 of 1

    • Use a T25 Torx screwdriver to loosen (but not remove) the two screws clamping the main pipe assembly to the control handle.

    Edit

  4. Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement: step 3, image 1 of 2 Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement: step 3, image 2 of 2

    • Remove the control handle from the main pipe assembly.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Adam O'Camb

Member since: 04/11/15

196,871 Reputation

416 Guides authored

Badges: 39

+36 more badges

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 26

All Time: 939