Fix Your Stuff Community Store

EasySMX ESM-9110 Handle Cover Replacement

Introduction

This guide will teach you how to remove the handle covers from your EasySMX ESM-9110 controller. Initially, screws will be visible on the back of the controller.

What you need

  1. EasySMX ESM-9110 Handle Cover Replacement, Handle Covers: step 1, image 1 of 2 EasySMX ESM-9110 Handle Cover Replacement, Handle Covers: step 1, image 2 of 2

    • Use a Phillips #000 screwdriver to remove the two 10 mm screws from the back of controller.

    Edit

  3. EasySMX ESM-9110 Handle Cover Replacement: step 2, image 1 of 1

    • Insert a plastic opening tool into the slit on the side of controller.

    • Wiggle the tool until the cover becomes loose.

    • Repeat this on the other side of Controller.

    • Go slow. Take your time removing the handle covers.

    Edit

  4. EasySMX ESM-9110 Handle Cover Replacement: step 3, image 1 of 1

    • Remove the faceplate.

    • Repeat on the other side of the controller.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 4 other contributors

Melanie Rodriguez

Member since: 03/18/24

406 Reputation

4 Guides authored

Badges: 7

+4 more badges

Team

UMass Dartmouth, Team 2-4, Konn Spring 2024 Member of UMass Dartmouth, Team 2-4, Konn Spring 2024

UMASSD-KONN-S24S2G4

4 Members

5 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 16

All Time: 312