Introduction

The Cyclone will need replacement if broken. There are multiple mechanisms in place to make access to the Cyclone easy.

First, make sure the device is unplugged and detach the wand from the main unit. Pull the bin release trigger.
  • First, make sure the device is unplugged and detach the wand from the main unit.

  • Pull the bin release trigger.

  • Some force is required to slowly pull the trigger up. lift the Cyclone until it stops.

Add Comment

While holding the disposal tab, press on the red button within the device. Continue to lift up with red button held until cyclone is removed. Make sure the bottom of the bin opens when the Cyclone is removed
  • While holding the disposal tab, press on the red button within the device.

  • Continue to lift up with red button held until cyclone is removed.

  • Make sure the bottom of the bin opens when the Cyclone is removed

Add Comment

Pull the pre-filter up by the knob. Pull the pre-filter up by the knob.
  • Pull the pre-filter up by the knob.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jesse Coward

Member since: 10/30/2017

101 Reputation

1 Guide authored

Team

UW Tacoma, Team S1-G5, Rose Fall 2017 Member of UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 18

Past 30 Days: 116

All Time: 877