Introduction

This guide will explain the process of removing the bin on the Dyson V8 Absolute. In the case of a broken or cracked bin, it is important to replace the bin for it to properly hold debris.

  1. Set the device upright on a flat surface and detach the wand.
    • Set the device upright on a flat surface and detach the wand.

    • Pull the red bin release trigger, on top of the cyclone. This will require some force.

  2. Pull up on the latch until it's fully extend. The bin will open to dispense debris once the red latch is pulled.
    • Pull up on the latch until it's fully extend.

    • The bin will open to dispense debris once the red latch is pulled.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Push the red circular button to release the latch on the cyclone. The cyclone should release and be fully detached from the device.
    • Push the red circular button to release the latch on the cyclone.

    • The cyclone should release and be fully detached from the device.

  5. Push on the red release button on the bottom of the bin. The bin should slide away from the handle.
    • Push on the red release button on the bottom of the bin.

    • The bin should slide away from the handle.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Miranda Laberge

Member since: 10/19/2017

382 Reputation

2 Guides authored

Team

UW Tacoma, Team S1-G5, Rose Fall 2017 Member of UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Members

7 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 3

Past 7 Days: 47

Past 30 Days: 247

All Time: 2,964