Dyson V6 Motorhead Connection Tubing Replacement
Addie Hedge and 3 other contributors
Last updated on May 17, 2017
Views: 2.3K
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 32
- Past 30 Days:
- 110
- All Time:
- 2,280
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Connection tube may get clogged with large debris picked up while vacuuming or damaged overtime.
-
-
-
Depress the button releasing an end of the connection tubing.
-
Pull the connection tubing away from the bottom vacuum head.
Ask FixBot
-
-
-
Depress the last button, freeing the connection tubing.
-
Pull connection tubing away from the upper vacuum head.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 22-6, Maness Winter 2017 Member of Cal Poly, Team 22-6, Maness Winter 2017
CPSU-MANESS-W17S22G6
4 Members
60 Guides authored
