Image 1/1: Set down the vacuum so that the clear debris bin is at the base of the vacuum and the silver cyclone is at the top
  • Prior to starting, make sure vacuum is unplugged

  • Set down the vacuum so that the clear debris bin is at the base of the vacuum and the silver cyclone is at the top

Add Comment

Image 1/1:
  • Locate the blue knob in the center of the silver cyclone labelled “Filter”

Add Comment

Image 1/2: Gently lift the filter up and out of the center of the vacuum cyclone (the silver part at the top of the vacuum) Image 2/2: Gently lift the filter up and out of the center of the vacuum cyclone (the silver part at the top of the vacuum)
  • Twist the blue knob clockwise

  • Gently lift the filter up and out of the center of the vacuum cyclone (the silver part at the top of the vacuum)

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Alexis Gutierrez

Member since: 09/17/2015

231 Reputation

1 Guide authored

Team

CSU Fullerton, Team 2-4, Bruce Fall 2015 Member of CSU Fullerton, Team 2-4, Bruce Fall 2015

CSUF-BRUCE-F15S2G4

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 25

Past 30 Days: 110

All Time: 1,834