Introduction

This guide will show you how to open and replace the bin of your Dyson DC58.

Make sure your vacuum is unplugged.
  • Make sure your vacuum is unplugged.

  • Avoid pressing the red trigger on the vacuum handle; this will power on the vacuum.

Add Comment

Locate the red lever parallel to the red trigger and on the side of the clear bin.
  • Locate the red lever parallel to the red trigger and on the side of the clear bin.

Add Comment

  • Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.

Add Comment

  • Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Ian Sloan

Member since: 09/17/2015

146 Reputation

1 Guide authored

Team

CSU Fullerton, Team 2-4, Bruce Fall 2015 Member of CSU Fullerton, Team 2-4, Bruce Fall 2015

CSUF-BRUCE-F15S2G4

4 Members

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 29

Past 30 Days: 102

All Time: 2,590