Introduction

Use this guide if you are experiencing a loss of performance in your Dyson DC39 Origin vacuum. This guide is easy, but an old Pre-filter can have a dramatic effect on the vacuum's performance.

Tools

No tools required.

Parts

No parts required.

Push down on the gray button located next to the power button to release the bin from the ball housing. Pull the bin away, then up from the ball housing to remove it. If the bin won't fit back into place during re-assembly, you may need to push the grey button again.
  • Push down on the gray button located next to the power button to release the bin from the ball housing.

  • Pull the bin away, then up from the ball housing to remove it.

  • If the bin won't fit back into place during re-assembly, you may need to push the grey button again.

Add Comment

Remove the purple pre-filter by pulling it up and out of the bin. Remove the purple pre-filter by pulling it up and out of the bin. Remove the purple pre-filter by pulling it up and out of the bin.
  • Remove the purple pre-filter by pulling it up and out of the bin.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Luke Matusiak

Member since: 04/26/2017

334 Reputation

3 Guides authored

Team

Cal Poly, Team S23-G6, Livingston Spring 2017 Member of Cal Poly, Team S23-G6, Livingston Spring 2017

CPSU-LIVINGSTON-S17S23G6

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 35

All Time: 139