Introduction

Use this guide to replace the bin of your Dyson DC39 Origin.

Push down on the gray button located next to the power button to release the bin from the ball housing. Pull the bin away, then up from the ball housing to remove it. If the bin won't fit back into place during re-assembly, you may need to push the grey button again.
  • Push down on the gray button located next to the power button to release the bin from the ball housing.

  • Pull the bin away, then up from the ball housing to remove it.

  • If the bin won't fit back into place during re-assembly, you may need to push the grey button again.

Add Comment

Black Friday
Broken doesn't stand a chance.
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Luke Matusiak

Member since: 04/26/2017

334 Reputation

3 Guides authored

Team

Cal Poly, Team S23-G6, Livingston Spring 2017 Member of Cal Poly, Team S23-G6, Livingston Spring 2017

CPSU-LIVINGSTON-S17S23G6

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 13

All Time: 86