Introduction

The small wheels on the bottom of the Dyson DC47 Cinetic Animal are important for helping the vacuum move. They are simple to replace.

Press the gray button to release the canister.
  • Press the gray button to release the canister.

Add Comment

Remove the canister by lifting it out.
  • Remove the canister by lifting it out.

Add Comment

Locate the small plastic stabilizer wheels on the vacuum.
  • Locate the small plastic stabilizer wheels on the vacuum.

Add Comment

Remove Stabilizer Wheel assembly by removing the 19 mm screw shown in the picture using a T15 Torx bit.
  • Remove Stabilizer Wheel assembly by removing the 19 mm screw shown in the picture using a T15 Torx bit.

Add Comment

Remove small plastic piece holding wheel assembly together.
  • Remove small plastic piece holding wheel assembly together.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jarod Kinney

Member since: 01/25/2017

107 Reputation

1 Guide authored

Team

Cal Poly, Team 9-5, Banghart Winter 2017 Member of Cal Poly, Team 9-5, Banghart Winter 2017

CPSU-BANGHART-W17S9G5

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 6

Past 30 Days: 11

All Time: 120