Introduction

This guide will demonstrate how to remove the filter in the cyclone canister and the base "ball." Filters may need to be replaced or cleaned periodically.

Turn off and unplug the vacuum. Turn off and unplug the vacuum.
  • Turn off and unplug the vacuum.

Add Comment

Press the red release button and pull the canister up and away.
  • Press the red release button and pull the canister up and away.

Add Comment

Pull up on the top handle while lifting up on the filter release latch. Pull up on the top handle while lifting up on the filter release latch.
  • Pull up on the top handle while lifting up on the filter release latch.

Add Comment

Pull the filter straight up to remove.
  • Pull the filter straight up to remove.

Add Comment

Lie the vacuum on its back so the blue dial is facing you. Lie the vacuum on its back so the blue dial is facing you.
  • Lie the vacuum on its back so the blue dial is facing you.

Add Comment

Grip the grooves on the blue dial and unscrew counterclockwise until the side housing is free. Grip the grooves on the blue dial and unscrew counterclockwise until the side housing is free.
  • Grip the grooves on the blue dial and unscrew counterclockwise until the side housing is free.

Add Comment

Turn 1/4 turn counterclockwise to release filter, then pull off to remove.
  • Turn 1/4 turn counterclockwise to release filter, then pull off to remove.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mitchell Klein

Member since: 04/23/2017

201 Reputation

2 Guides authored

Team

Cal Poly, Team S15-G5, Banghart Spring 2017 Member of Cal Poly, Team S15-G5, Banghart Spring 2017

CPSU-BANGHART-S17S15G5

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 18

All Time: 98