Introduction

This guide leads you through the process of opening up the LabelManager and changing the keyboard. Keep in mind that the device has loose parts. Be careful and keep track of all parts.

Image 1/2: Remove the label cassette. Image 2/2: Remove the label cassette.
  • Remove battery.

  • Remove the label cassette.

Add Comment

Image 1/2: Image 2/2:
  • Remove the 6 screws in the indicated places. These particular screws are 2mm x 8mm Phillips #0 head

Add Comment

Image 1/2: The keys/buttons highlighted in the second picture fall out easily so be careful. Keep device faced down in order to keep them from falling. Image 2/2: The keys/buttons highlighted in the second picture fall out easily so be careful. Keep device faced down in order to keep them from falling.
  • Use the spudger to take apart the device by insterting it as shown in the picture and twisting it. This should be done all around the device to ensure the two parts split correctly.

  • The keys/buttons highlighted in the second picture fall out easily so be careful. Keep device faced down in order to keep them from falling.

Add Comment

Image 1/2: Image 2/2:
  • Remove the rubber keyboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Steven Nguyen

Member since: 02/08/2016

407 Reputation

3 Guides authored

Team

USF Tampa, Team 6-5, Eyestone Spring 2016 Member of USF Tampa, Team 6-5, Eyestone Spring 2016

USFT-EYESTONE-S16S6G5

3 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 95