Introduction
This guide walks through removing the exterior case of the Drobo to get to its inside.
What you need
-
-
-
To start getting the case off remove the front panel so it's out of the way.
Ask FixBot
-
-
-
-
Next remove the screws from the feet of the case with a phillips head screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 10-4, Banghart Winter 2017 Member of Cal Poly, Team 10-4, Banghart Winter 2017
CPSU-BANGHART-W17S10G4
3 Members
60 Guides authored
