Skip to main content

Fix Your Stuff

Right to Repair

Store

Parts

No parts specified.

  1. Pry off the left side bearing cap with a flat head screw driver. Pry off the left side bearing cap with a flat head screw driver.
    • Pry off the left side bearing cap with a flat head screw driver.

  2. Tilt the idle tube so the nub falls out. Replace the nub into the bearing cap.
    • Tilt the idle tube so the nub falls out.

    • Replace the nub into the bearing cap.

  3. Push the completed bearing cap and nub onto the end of the tube. Be careful not to push the nub back into the tube.
    • Push the completed bearing cap and nub onto the end of the tube. Be careful not to push the nub back into the tube.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David

Member since: 11/11/2020

1 Reputation

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 3

Past 30 Days: 43

All Time: 43