Skip to main content
  1. Remove the four Phillips head screws that fasten the motor hub to the tube adapter. Remove the four Phillips head screws that fasten the motor hub to the tube adapter.
    • Remove the four Phillips head screws that fasten the motor hub to the tube adapter.

  2. Using a flathead screwdriver, pry the bearing cap from the tube. Using a flathead screwdriver, pry the bearing cap from the tube.
    • Using a flathead screwdriver, pry the bearing cap from the tube.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David

Member since: 11/11/2020

709 Reputation

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 19