Introduction

The type of front facing camera that the tablet requires is a 0.3 MP. The video on the tablet uses 30fps 720p(MPEG-4/H.264).

  1. Position the tablet so the ports and screws are facing you.
    • Position the tablet so the ports and screws are facing you.

  2. Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.
    • Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use the plastic opening tool to assist in removing the back cover. Use the plastic opening tool to assist in removing the back cover.
    • Use the plastic opening tool to assist in removing the back cover.

  5. Upon removing the back cover position the tablet as seen in the picture.
    • Upon removing the back cover position the tablet as seen in the picture.

  6. Lift the black bar towards the right to expose the data strip. Lift the black bar towards the right to expose the data strip. Lift the black bar towards the right to expose the data strip.
    • Lift the black bar towards the right to expose the data strip.

  7. Remove the data strip and camera. Remove the data strip and camera. Remove the data strip and camera.
    • Remove the data strip and camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stacey Mattila

Member since: 03/18/2015

543 Reputation

5 Guides authored

Team

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 116