What you need
-
-
-
Disconnect the connectors attached to the control panel.
Ask FixBot
-
-
-
Unclip any connections the control panel cable has to the chassis or other components.
-
-
-
To prevent confusion, label each detergent hose and its corresponding dispenser connection.
-
-
-
-
Use slip joint pliers to pinch the detergent dispenser hose clamp and pull it away from the assembly.
-
-
-
Use slip joint pliers to gently rotate the detergent dispenser hose back and forth around its connection and loosen it.
-
-
-
Pull the detergent dispenser hose straight off its connection on the assembly.
-
Repeat the loosening and removal procedure for each hose.
-
-
-
Loosen any fasteners securing the bellows to the detergent dispenser.
-
Pull the bellows straight off its connection on the dispenser to disconnect it.
-
-
To reassemble your device, follow these instructions in reverse order.
