Skip to main content

Disassembling

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Disassembling, Disassembling: step 1, image 1 of 1
    • Remove six 10 mm length screws from the bottom panel of the SoundDock.XT using a #1 Phillips screwdriver.

  2. Disassembling: step 2, image 1 of 1
    • Remove the Front Panel, use a #2 Phillips screwdriver to remove the two 6.5 mm length front panel screws located under the bottom cover (highlighted in red circles in the photo).

  3. Disassembling: step 3, image 1 of 1
    • Next, use a plastic opening tool to slide under the edge of the front cover. Start edge located at the top of the left or right speaker and work your way around the speaker. Remove the front cover.

  4. Disassembling: step 4, image 1 of 2 Disassembling: step 4, image 2 of 2
    • Use a wide nose tweezer to remove six rubber grommets from the front of the SoundDock XT.

    • Using pointed tweezers may damage the rubber grommet.

  5. Disassembling: step 5, image 1 of 1
    • Use a #2 screwdriver to remove the six 8.5 mm length screws from the speaker cover.

  6. Disassembling: step 6, image 1 of 1
    • Using a metal spudger, slide between the outer case and the front speaker cover. Work your way around the cover and remove the speaker cover. You now have access to the speakers.

    • Using the metal spudger may damage the plastic speaker cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Tarissa Miller

Member since: 10/01/15

218 Reputation

1 Guide authored

Team

IUPUI, Team 1-4, Hagerty Fall 2015 Member of IUPUI, Team 1-4, Hagerty Fall 2015

IUPUI-HAGERTY-F15S1G4

5 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 95