Disassembling the Samsung Laptop Ultrabook NP530U3B

Step 1 Disassembling the Samsung Laptop Ultrabook NP530U3B

• Remove the 8 small screws.
Step 2



• Remove the other 6 screws.
• Remove the hard disk and the RAM slots.
Step 3
• This is the hard disk - Hitachi 500 GB
Step 4
• Ensure that the hard disk has been removed. Carefully detach the bottom cover.
Step 5
• Once the bottom cover is removed, your device should look like this.
Step 6
• Remove the 4 screws to detach the battery.
• Remove all of the sticky tape.
• Carefully disconnect the small power connector by using a tool to push the connector out through the small gap in the middle of the connector.
• The connector won't come out all the way, because the battery pack is in its way.
Step 7
• This is the Samsung 7.4V 45Wh battery.
• Ensure that the battery is removed before continuing.
Step 8
• When the battery is removed, this is how it will look.
Step 9
• Remove the processor fan.
• There are 2 screws holding it in place. Loosen and remove them.
Step 10
• This is the processor fan.
Step 11
• Remove the processor heat sink.
• 3 screws hold this part in place. Loosen and remove them.
Step 12
• Disconnect the antenna cables from the WiFi card.
• Remove the screw.
• Be sure to match the colors when reattaching the cables.
Step 13
• Remove the screw.
• Lift the latch upwards to loosen the cable.
Step 14
• Remove the screw.
Step 15
• Remove the screw.
Step 16
• To remove the Motherboard, carefully disconnect the cables.
Step 17
• This is the Motherboard - there is a front and rear view.

Author

with 7 other contributors

Jose Gustavo Abreu Murta

Member since: 07/06/10

4,598 Reputation

9 Guides authored

Badges: 27

• 
• 
• 

+24 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview