Fix Your Stuff Community Store

Disassembling the Inspiron 7359 2-in-1

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

This short guide will give step by step instructions on the removal of the bottom panel of the Inspiron 7359 2-in-1. This disassembly requires the use of a Phillips #0 screwdriver, and a spudger.

What you need

  1. Disassembling the Inspiron 7359 2-in-1, Disassembling the Inspiron 7359 2-in-1: step 1, image 1 of 1

    • Turn off device before starting.

    • Turn the laptop upside down with the logo facing the surface of the table.

    Edit

  2. Disassembling the Inspiron 7359 2-in-1: step 2, image 1 of 2 Disassembling the Inspiron 7359 2-in-1: step 2, image 2 of 2

    • Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

    Edit

  4. Disassembling the Inspiron 7359 2-in-1: step 3, image 1 of 1

    • Use a spudger to separate the back cover from the laptop.

    • Start from one corner and work your way around the edge of the cover.

    • Be careful not to bend or crack the back cover.

    Edit

  5. Disassembling the Inspiron 7359 2-in-1: step 4, image 1 of 1

    • All hardware components should be exposed.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Author

with 7 other contributors

meetkumar desai

Member since: 10/08/17

330 Reputation

2 Guides authored

Badges: 11

+8 more badges

Team

Gateway, Team S1-G3, Saknee Fall 2019 Member of Gateway, Team S1-G3, Saknee Fall 2019

GCC-SAKNEE-F19S1G3

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 86