Fix Your Stuff Community Store

Disassembling iPhone 4S Battery

Archived Guide
This guide is retained solely for historical purposes. Use the updated version of the guide to perform your repair.

Introduction

This guide has been updated by iFixit staff! Read the new, official guide here.

What you need

  1. Disassembling iPhone 4S Battery, Disassembling iPhone 4S Battery: step 1, image 1 of 1

    • Using a 5-point pentalobe screwdriver, unscrew the 2 pentalobe on the bottom of the phone near the dock connector.

    Edit

  2. Disassembling iPhone 4S Battery: step 2, image 1 of 1

    • Push the back glass towards the top of the phone.

    Edit

  4. Disassembling iPhone 4S Battery: step 3, image 1 of 1

    • Using a #000 Phillips screwdriver, unscrew the 2 very small Phillips screws.

    Edit

  5. Disassembling iPhone 4S Battery: step 4, image 1 of 2 Disassembling iPhone 4S Battery: step 4, image 2 of 2

    • Using a plastic opener tool, pry up the battery connector shield. Be careful not to lose the smaller antenna connector shield under the top connector sheild.

    • Using a plastic opener tool, pry up the battery connector.

    Edit

  6. Disassembling iPhone 4S Battery: step 5, image 1 of 1

    • Pull upwards on the plastic tab. If it's the first time, you may have to use the plastic pry tool on the outside (right) edge of the battery to loosen battery first.

    • Then, out pops the battery.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Author

with 10 other contributors

Chandler Skinner

Member since: 10/15/11

3,710 Reputation

6 Guides authored

Badges: 33

+30 more badges

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 5,975