Introduction

This guide is a prerequisite for replacing other parts of an Xbox 360 E.

Parts

No parts required.

Image 1/1: Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.
  • Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.

  • Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

Add Comment

Image 1/1: Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.
  • Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.

  • Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

Add Comment

Image 1/3: Pull the top panel off. Image 2/3: Pull the top panel off. Image 3/3: Pull the top panel off.
  • Continue sliding the spudger along the perimeter of the left grated face of the Xbox.

  • Pull the top panel off.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Jennifer

Member since: 02/02/2014

1,333 Reputation

4 Guides authored

Team

Cal Poly, Team 2-11, Amido Winter 2014 Member of Cal Poly, Team 2-11, Amido Winter 2014

CPSU-AMIDO-W14S2G11

4 Members

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 937