Disassembling Xbox 360 E Bottom Panel

You're viewing a previously published version of this guide. View latest version

Mar 17, 2014 - 02:23:59

Mar 17, 2014 - 02:30:20 Mar 17, 2014 - 02:23:59 Mar 17, 2014 - 02:23:58 Mar 03, 2014 - 08:23:33 Mar 02, 2014 - 03:30:05 Mar 02, 2014 - 03:28:26 Feb 25, 2014 - 03:00:23 Feb 25, 2014 - 02:57:52 Feb 25, 2014 - 02:54:39 Feb 25, 2014 - 02:28:57 Feb 25, 2014 - 02:26:49 Feb 25, 2014 - 02:17:59 Feb 25, 2014 - 02:17:48 Feb 25, 2014 - 02:17:22 Feb 25, 2014 - 11:17:04 Feb 23, 2014 - 05:29:42 Feb 23, 2014 - 05:28:59 Feb 23, 2014 - 05:28:23 Feb 23, 2014 - 02:30:50 Feb 23, 2014 - 02:29:28 Feb 23, 2014 - 02:29:06 Feb 23, 2014 - 02:28:40 Feb 23, 2014 - 02:28:11 Feb 23, 2014 - 02:27:24 Feb 23, 2014 - 01:09:19 Feb 23, 2014 - 01:08:36 Feb 20, 2014 - 02:51:37 Feb 20, 2014 - 02:51:16 Feb 20, 2014 - 02:50:43

Newer

Introduction

This guide is a prerequisite for another replacement guide.

Step 1 Bottom Panel

Disassembling Xbox 360 E Bottom Panel, Bottom Panel: step 1, image 1 of 1

Push the spudger into the crevice between the right grated face and the top body of the Xbox. It's easier to begin away from the vent.
Pull up on the spudger like a lever, keeping it pressed firmly into the crevice.

Step 2

Slide the spudger along the crevice to separate the grated face and the top body.

Step 3

Disassembling Xbox 360 E Bottom Panel: step 3, image 3 of 3

Wiggle the spudger in the crevice as you slide the spudger to loosen the bottom plate.
Slide the spudger along the crevice, going completely about the perimeter of the bottom panel.
Pull the bottom panel off.