Tools

No tools required.

Parts

No parts required.

  1. Use a large plastic opening tool along the rear panel:
    • Use a large plastic opening tool along the rear panel:

      • There are 4 clips to release.

    Add Comment

  2. Slide the cover along the plastic frame.
    • Slide the cover along the plastic frame.

    Add Comment

    • Slide off the largest plastic pieces.

    Add Comment

    • Bend the second small plastic piece to release it from the rubber piece.

    • Now you can slide it out.

    Add Comment

    • Slide out the hard drive as shown in the picture

    • Make sure to slide as shown or you may damage the USB bridge logic board.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Gaetan

Member since: 12/26/2012

9,301 Reputation

18 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 30

All Time: 2,208