Skip to main content

Introduction

The Walkman uses a screwdriver to open the back of the device.

  1. Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.
    • Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.

    • Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

  2. Use a small prying tool to carefully pry open the back of the device.
    • Use a small prying tool to carefully pry open the back of the device.

Conclusion

To reassemble your device, follow these instructions in the reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 52