Parts

No parts required.

Image 1/2: Image 2/2:
  • Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.

Add Comment

Image 1/2: Place the screws in a small container to avoid losing them. Image 2/2: Place the screws in a small container to avoid losing them.
  • Use a Philip's head screw driver to remove the screws from the case.

  • Place the screws in a small container to avoid losing them.

Add Comment

Image 1/3: First, insert a small pry bar where the black front cover and white back cover meet. Image 2/3: Begin prying the black plastic up, slowing moving around to the bottom and other side. Image 3/3: At an angle, carefully pull up on the front cover separate the two pieces.
  • Remove the front cover.

    • First, insert a small pry bar where the black front cover and white back cover meet.

    • Begin prying the black plastic up, slowing moving around to the bottom and other side.

    • At an angle, carefully pull up on the front cover separate the two pieces.

  • Excellent! Now you have removed the front cover!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Trey

Member since: 03/09/2012

77 Reputation

2 Guides authored

Team

Clemson, Team 2-1, Benson Spring 2012 Member of Clemson, Team 2-1, Benson Spring 2012

CLEM-BENSON-S12S2G1

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 1,397