Remove the 2 screws on the back cover using a Phillips head #0 screwdriver. Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
  • Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.

Add Comment

Remove the screw on each side of the device using a Phillips head screwdriver. Remove the screw on each side of the device using a Phillips head screwdriver.
  • Remove the screw on each side of the device using a Phillips head screwdriver.

Add Comment

Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws. Gently pry open the back cover. Insert the plastic opening tool in between the cover joints. Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.
  • Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.

  • Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Dylan Peters

Member since: 10/18/2013

401 Reputation

4 Guides authored

Team

Clemson, Team 14-8, Benson Fall 2013 Member of Clemson, Team 14-8, Benson Fall 2013

CLEM-BENSON-F13S14G8

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 213