Introduction

How to remove keyboard

Push open the latch and remove the battery. Push open the latch and remove the battery.
  • Push open the latch and remove the battery.

Add Comment

Twist off the antenna. Pop off the transparent cylinder.
  • Twist off the antenna.

  • Pop off the transparent cylinder.

Add Comment

Remove the five screws as shown.
  • Remove the five screws as shown.

Add Comment

Carefully pry the back plate off.
  • Carefully pry the back plate off.

Add Comment

Carefully detach golden screen connector. Carefully detach golden screen connector.
  • Carefully detach golden screen connector.

Add Comment

Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
  • Pop out the logic board with spudger.

  • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

Add Comment

Place the logic board on a clean tray. Place the logic board on a clean tray.
  • Place the logic board on a clean tray.

Add Comment

Peel off the keyboard.
  • Peel off the keyboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

doconnor

Member since: 04/19/2010

25 Reputation

6 Guides authored

Team

Cal Poly, Team 10-43, Garner Spring 2010 Member of Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 1,052