Introduction

This guide tells you how to remove the back or rear panel of the Samsung Epic 4G, which is an important first step in working with the internal parts of the phone.

Parts

No parts required.

Turn off the phone using the "Power Button". The Power button is located on the left side of the phone and has a circle on it.
  • Turn off the phone using the "Power Button". The Power button is located on the left side of the phone and has a circle on it.

  • To remove the back panel of the phone, slide your fingernail along the edge of the device and pull at the panel as shown in the figure. While pulling at it along the edge you will hear a snap. That snap tells you that the panel is coming off the phone.

Add Comment

After hearing the snap you should be able to remove the plastic backing by pulling at it gently.
  • After hearing the snap you should be able to remove the plastic backing by pulling at it gently.

Add Comment

Finish Line

3 other people completed this guide.

Andrew Cunningham

Member since: 10/03/2012

255 Reputation

6 Guides authored

Team

Cal Poly, Team 24-25, Regan Fall 2012 Member of Cal Poly, Team 24-25, Regan Fall 2012

CPSU-REGAN-F12S24G25

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 734