Introduction

This guide is to remove the base plate. This will allow you to access the rest of your saw and disassemble it properly.

Parts

No parts required.

Orient your saw so that the blade is pointing in the opposite direction of your body. Ensure that the screws circled are visible and pointing skyward. This will be the standard position of the Jigsaw for the duration of this guide. Orient your saw so that the blade is pointing in the opposite direction of your body. Ensure that the screws circled are visible and pointing skyward. This will be the standard position of the Jigsaw for the duration of this guide. Orient your saw so that the blade is pointing in the opposite direction of your body. Ensure that the screws circled are visible and pointing skyward. This will be the standard position of the Jigsaw for the duration of this guide.
  • Orient your saw so that the blade is pointing in the opposite direction of your body. Ensure that the screws circled are visible and pointing skyward. This will be the standard position of the Jigsaw for the duration of this guide.

Add Comment

  • Using two hands grip both side of the saw and lift 90 degree as demonstrated.

Add Comment

  • Identify the screw circled in red and remove with Phillips screwdriver.

Add Comment

  • Lift base plate up into the air and place off to side. Do not forget to place the removed screw in an area you will easily find it later.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adam Cardoso

Member since: 11/12/2013

318 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 24

All Time: 1,028