Introduction

In this guide, we will go through disassembling your device's case to access internal components

  1. Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together. Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together.
    • Use a philips #00 screwdriver to unscrew both 4.064mm screws at the top of the device which hold it together.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Press a plastic opening tool into the space between the front and back portions of the case. Run it along the perimeter of the device to unhook the many plastic tabs.
    • Press a plastic opening tool into the space between the front and back portions of the case.

    • Run it along the perimeter of the device to unhook the many plastic tabs.

    • Gently pull both sides apart.

    • The speaker is connected to the back cover so be careful when separating

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Stephen Radachy

Member since: 03/17/2015

807 Reputation

5 Guides authored

Team

One Comment

boi this it too easy

murphy mcgrath - Reply

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 583