Danger
Potentially Dangerous
Injury may result if this procedure is not followed properly. Use caution and follow all warnings.
Danger

Parts

No parts required.

Image 1/1:
  • Disconnect the power supply cord from the outlet.

Add Comment

Image 1/2: The first four screws are located on either side of the microwave front. Image 2/2: The first four screws are located on either side of the microwave front.
  • Remove the eight screws holding the wood-patterned cover to the microwave frame.

  • The first four screws are located on either side of the microwave front.

Add Comment

Image 1/2: Image 2/2:
  • Remove the additional four screws securing the wood-paneled case to the microwave frame.

Add Comment

Image 1/3: Lift the case upward slowly until the case is free of the microwave. Image 2/3: Lift the case upward slowly until the case is free of the microwave. Image 3/3: Lift the case upward slowly until the case is free of the microwave.
  • Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.

  • Lift the case upward slowly until the case is free of the microwave.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Samuel

Member since: 09/26/2012

93 Reputation

2 Guides authored

Team

Cal Poly, Team 2-12, Propen Fall 2012 Member of Cal Poly, Team 2-12, Propen Fall 2012

CPSU-PROPEN-F12S2G12

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 11

All Time: 1,315