Parts

No parts required.

Image 1/1:
  • Locate the battery cover on the bottom of the camera.

Add Comment

Image 1/1:
  • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

Add Comment

Image 1/1:
  • Remove the batteries from the camera.

Add Comment

Image 1/1:
  • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

Add Comment

Image 1/1: Repeat this step for the back casing.
  • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

  • Repeat this step for the back casing.

Add Comment

Image 1/1:
  • Locate the black plastic strip under the screen above the white plastic strip.

Add Comment

Image 1/1: The black plastic piece is not meant to come all the way off, just enough to release the screen.
  • Pull up both sides of the black piece up about a mm.

  • The black plastic piece is not meant to come all the way off, just enough to release the screen.

  • Once the piece is lifted carefully slide the screen out of the slot.

Add Comment

Image 1/1:
  • Unscrew and remove the four (6 mm) screws on the inside casing.

Add Comment

Image 1/1:
  • Pull the inner casing off of the camera.

Add Comment

Image 1/1:
  • Unscrew and remove the four (4mm) screws from the logic board.

Add Comment

Image 1/1:
  • Use a spudger to pry up all four sides of the logic board and slide it out of the camera.

Add Comment

Image 1/1:
  • Unscrew and remove the two (5mm) screws from the logic board to the far left.

Add Comment

Image 1/1:
  • Locate the black plastic piece behind the lens.

Add Comment

Image 1/1: The piece will not come all the way off; only enough to release the lens.
  • Similar to the LCD screen, pull the black piece up about a mm and it will release the lens.

  • The piece will not come all the way off; only enough to release the lens.

  • Once the black piece is lifted slide the ribbon out to release the lens.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dani

Member since: 06/24/2010

21 Reputation

7 Guides authored

Team

Cal Poly, Team 3-3, Johann Summer 2010 Member of Cal Poly, Team 3-3, Johann Summer 2010

CPSU-JOHANN-R10S3G3

2 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 836