Difficulty
Moderate
Steps
5
Time Required
2 minutes
Missed a Step
Oops! This guide is currently missing some important steps.
Introduction
Removing the casing is necessary to replace the LCD screen or the buttons.
Parts
No parts required.
-
Locate the battery cover on the bottom of the camera.
-
Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
-
Remove the batteries from the camera.
-
Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.
-
Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.
-
Repeat this step for the back casing.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 3-3, Johann Summer 2010 Member of Cal Poly, Team 3-3, Johann Summer 2010
CPSU-JOHANN-R10S3G3
2 Members
7 Guides authored
