Introduction

How to take out the buttons and replace them.

Parts

No parts required.

  1. Locate the battery cover on the bottom of the camera.
    • Locate the battery cover on the bottom of the camera.

  2. Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
    • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Remove the batteries from the camera.
    • Remove the batteries from the camera.

  5. Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.
    • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

  6. Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.
    • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

    • Repeat this step for the back casing.

  7. Pop the necessary buttons out of the plastic housing.
    • Pop the necessary buttons out of the plastic housing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dani

Member since: 06/24/2010

21 Reputation

7 Guides authored

Team

Cal Poly, Team 3-3, Johann Summer 2010 Member of Cal Poly, Team 3-3, Johann Summer 2010

CPSU-JOHANN-R10S3G3

2 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 820