Introduction

This is a guide to removing the macroline that connects the POPS and the regulator. This is necessary if the macroline is leaking or to disassemble the body.

  1. Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline. It helps to rotate the collar to create room to pull out macroline. It helps to rotate the collar to create room to pull out macroline.
    • Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.

    • It helps to rotate the collar to create room to pull out macroline.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. While pulling in the metal ring on the fitting, pull the macroline out. While pulling in the metal ring on the fitting, pull the macroline out. While pulling in the metal ring on the fitting, pull the macroline out.
    • While pulling in the metal ring on the fitting, pull the macroline out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rett Triplett

Member since: 10/18/2013

801 Reputation

8 Guides authored

Team

Clemson, Team 13-6, Benson Fall 2013 Member of Clemson, Team 13-6, Benson Fall 2013

CLEM-BENSON-F13S13G6

3 Members

8 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 725