Introduction

In this guide, the grip will be removed so the battery, wires, or board can be accessed.

Tools

Parts

No parts required.

  1. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.
    • Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Pull the grip away from the frame. Pull the grip away from the frame.
    • Pull the grip away from the frame.

  4. Pull the grip through the opening. The grip is connected in the middle and is one piece.
    • Pull the grip through the opening.

    • The grip is connected in the middle and is one piece.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rett Triplett

Member since: 10/18/2013

801 Reputation

8 Guides authored

Team

Clemson, Team 13-6, Benson Fall 2013 Member of Clemson, Team 13-6, Benson Fall 2013

CLEM-BENSON-F13S13G6

3 Members

8 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 338