Introduction
This guide aims to teach the owner of a Microtek Scanmaker 5900 how to remove the lid of the device.
-
-
Loosen the screws on the serial port by turning them counter clockwise by hand.
-
After loosening the screws, pull the serial port out.
Ask FixBot
-
-
-
-
Lift lid to its vertical position.
-
Pull lid straight up to remove it from the scanner.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 6-9, Regan Fall 2011 Member of Cal Poly, Team 6-9, Regan Fall 2011
CPSU-REGAN-F11S6G9
2 Members
22 Guides authored
