Disassembling Logitech UE MegaBoom 3 General Disassembly - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

This is a general disassembly guide that is used to access the different components that make up the speaker.

What you need

1. Step 1 General Disassembly
  To access all internal components, first flip the speaker upwards to where you can see the base.
  
  Place your blue iFixit opening picks inside the gap between the speaker and the base to act as a lever when opening the speaker.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 2
  Using the flat head #4.5 screw driver, carefully lever and rotate the driver around the edge of the speaker to enlarge the gap further.
  
  Here, it is ideal to use a spudger as opposed to the flathead screwdriver, however, the flathead makes it so much easier to pry off the cap.
  
  Pry off the base of the speaker and remove the end cap.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

One other person completed this guide.

Author

with 2 other contributors

Anthony Miles

Member since: 09/04/23

1,021 Reputation

6 Guides authored

Team

University of Memphis, Team 1-2, Sneed Fall 2023 Member of University of Memphis, Team 1-2, Sneed Fall 2023

UM-SNEED-F23S1G2

4 Members

84 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 172