In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
how to clean a filter
- please remove the plug from power outlet .
1check below the washing machine.
2you will see a rectangular box or a circular cover .
3 open it.
4 if you open the box, in your edition, you can see a holes.
5 but if you do not see a hole, open the filter , then open it to drain the dirt water.
6 after draining, clean the filter.
7 after cleaning the filter, put the filter back, then close the circular cover or rectangular box'
this procedure can may be work for another washing machine.
thankyou
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
0 Guide Comments