Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Disassembling GravityLight Back Panel

Views: 192

View statistics:

Past 24 Hours:
0
Past 7 Days:
3
Past 30 Days:
8
All Time:
192
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 5 - 10 minutes
Difficulty: Easy
Prerequisite Only

This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Disassembling GravityLight Back Panel

What you need

Tools

    1. Disassembling GravityLight Back Panel, Removing the Front Panel: step 1, image 1 of 2 Disassembling GravityLight Back Panel, Removing the Front Panel: step 1, image 2 of 2
      • Flip the GravityLight on its back and place it on a sturdy surface.

      • Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.

      Ask FixBot

      Add Comment

    2. Disassembling GravityLight Back Panel, Opening the Device Housing: step 2, image 1 of 1
      • Some of the internal pieces may loosen or fall out during disassembly.

      • Firmly grasp both parts of the GravityLight body and pull them apart.

      Ask FixBot

      Add Comment

    1. Disassembling GravityLight Back Panel, Removing the Back Panel Screws: step 3, image 1 of 1
      • Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.

      • Unscrew the two 2cm Phillips 00 screws on the inside of the back panel.

      Ask FixBot

      Add Comment

    2. Disassembling GravityLight Back Panel, Separating the Back Panel Housing: step 4, image 1 of 3 Disassembling GravityLight Back Panel, Separating the Back Panel Housing: step 4, image 2 of 3 Disassembling GravityLight Back Panel, Separating the Back Panel Housing: step 4, image 3 of 3
      • Some of the internal pieces may loosen or fall out during disassembly.

      • Firmly grasp both parts of the back panel and pull them apart.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with

Brian Gouldsberry

Member since: 09/26/14

201 Reputation

2 Guides authored

Team

Cal Poly, Team 12-2, Forte Fall 2014 Member of Cal Poly, Team 12-2, Forte Fall 2014

CPSU-FORTE-F14S12G2

5 Members

84 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 8

All Time: 192