Skip to main content

Introduction

This guide will explain how to remove the outer case of the General Electric Bagel Switch 4-Slice Toaster.

Parts

No parts specified.

  1. Unplug the toaster from the electrical outlet.
    • Unplug the toaster from the electrical outlet.

  2. Remove the two levers and four dials by pulling them out directly towards you. Removing these components may require some force, but they will release.
    • Remove the two levers and four dials by pulling them out directly towards you.

    • Removing these components may require some force, but they will release.

  3. Look for the plastic clips on the back side of the toaster.
    • Look for the plastic clips on the back side of the toaster.

    • Disconnect the small plastic clips on the back of the toaster. Use Philips head Screwdriver to do this step.

    • Now, carefully remove the toaster casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ron Gajdos

Member since: 10/16/2013

307 Reputation

3 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 10

All Time: 880