Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Disassembling Dell OptiPlex FX170 Case

Views: 298

View statistics:

Past 24 Hours:
0
Past 7 Days:
8
Past 30 Days:
12
All Time:
298
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 5 - 10 minutes
Difficulty: Easy
Prerequisite Only

This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Disassembling Dell OptiPlex FX170 Case

Introduction

Go to step 1 ↓

Prerequisite Only

What you need

Tools

  • Phillips #0 Screwdriver
    5
  • Spudger
    4.9
    1. Disassembling Dell OptiPlex FX170 Case, Case: step 1, image 1 of 1
      • With the base stand facing upwards, unscrew the 6mm Phillips #2 screw.

      • Pull the base stand straight up from the device.

      Ask FixBot

      Add Comment

    2. Disassembling Dell OptiPlex FX170 Case: step 2, image 1 of 2 Disassembling Dell OptiPlex FX170 Case: step 2, image 2 of 2
      • Unscrew and remove the eight 4mm Phillips #0 screws (four on top, four on bottom) from the top and bottom of the device.

      Ask FixBot

      Add Comment

    3. Disassembling Dell OptiPlex FX170 Case: step 3, image 1 of 3 Disassembling Dell OptiPlex FX170 Case: step 3, image 2 of 3 Disassembling Dell OptiPlex FX170 Case: step 3, image 3 of 3
      • Run the flat side of the spudger along the entire line of the case starting from the back where the power plug and a small screw are located.

      • Use care to not apply excessive force that could damage retaining clips while running the spudger along the case.

      Ask FixBot

      Add Comment

    4. Disassembling Dell OptiPlex FX170 Case: step 4, image 1 of 2 Disassembling Dell OptiPlex FX170 Case: step 4, image 2 of 2
      • Once the clips have been released, gently disengage the cover from the rest of case by pulling in opposite directions.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with

Frank Pecka

Member since: 01/13/15

340 Reputation

3 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 12

All Time: 298