Introduction

Prerequisite Only

Parts

No parts required.

  1. Using the T-15 screwdriver, remove the four 22-mm torx screws on the gear case.
    • Using the T-15 screwdriver, remove the four 22-mm torx screws on the gear case.

      • Unplug the grinder before any disassembly.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Pull out the gear case.
    • Pull out the gear case.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Will Young

Member since: 02/05/2015

236 Reputation

2 Guides authored

Team

Cal Poly, Team 18-6, Maness Winter 2015 Member of Cal Poly, Team 18-6, Maness Winter 2015

CPSU-MANESS-W15S18G6

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 13

All Time: 425