Introduction

This guide explains how to disassemble the Breville BKC600XL coffee brewer head.

Image 1/3: Two 12mm black Truss Phillips screws. Image 2/3: Reminder for reassembly; This bottom piece is first to be screwed back on. Image 3/3: Reminder for reassembly; This bottom piece is first to be screwed back on.
    • Remove the following 2 screws:

      • Two 12mm black Truss Phillips screws.

    • Reminder for reassembly; This bottom piece is first to be screwed back on.

Add Comment

Image 1/1:
  • Remove the two 12mm Phillips screws.

Add Comment

Image 1/3: Remove the two 12mm hexagonal screws. Image 2/3: Remove the two 12mm hexagonal screws. Image 3/3: Remove the two 12mm hexagonal screws.
  • Remove the grey plastic casing.

  • Remove the two 12mm hexagonal screws.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Antonio

Member since: 09/26/2012

25 Reputation

6 Guides authored

Team

Cal Poly, Team 1-3, Propen Fall 2012 Member of Cal Poly, Team 1-3, Propen Fall 2012

CPSU-PROPEN-F12S1G3

4 Members

6 Guides authored

One Comment

Thanks so much for posting this! I was ready to throw my Breville out the window! Step three highlighted the closing mechanism and I was able to easily repair my machine!!

Thanks

acaltab - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 29

All Time: 2,281