Introduction
Before using this device, make sure you learn how to disassemble the product from the following guide. Then, wash all the parts to extend life of the unit.
-
-
-
To undo the locking latches: Pull outwards at the bottom of each latch to detach them from the groove on the cover .
Ask FixBot
-
-
-
To remove the cover: Take out the feeder, hold the chute firmly and pull up the cover.
-
-
-
-
To remove the pulp container: Hold the juice spout with one hand and the back edge of the pulp separator with the other hand. Pull it up while making sure that the cutter/strainer is kept in place
-
-
-
To remove the cutter/strainer: Hold the juice spout with one hand and clutch the edge of the cutter/strainer with the other hand; pull it out slowly.
-
-
-
To remove the pulp separator: Hold the sides firmly and pull the container out.
-
-
To reassemble your device, follow this guide in reverse order.
